One Panel, Not the Whole Kitchen:
How Repairs Work
Every door, drawer front and panel in a wrapped room is its own piece of work. So a knock on one of them is a repair to one of them — that element is re-wrapped, and the rest of the room is never touched.
What makes that possible years later is a code. The manufacturer's film reference is named on your quote, on your invoice and on the roll label opened in front of you, so the same finish can be ordered again from the same brand.
The short answer.
A knock from a chair leg, a scratch across a drawer front, a builder's ladder through a panel. In a wrapped interior each of those is a repair to a single element. That door or panel is re-wrapped on its own, and the rest of the kitchen, the run of office doors or the lift car stays exactly as it is.
What makes the match possible is the reference. Every architectural film we install carries the manufacturer's own code, and that code is written against each element on your quote, repeated on your invoice and printed on the roll label — so the exact finish can be ordered again rather than guessed at.
The first step is a small one. Send us a photograph of the damage and we will tell you honestly what you are looking at: a re-wrap of that one element, or something that has gone deeper than the film and needs a different answer first.
Why one damaged element stays a small problem.
The same six questions, asked of a wrapped room and of a kitchen that was replaced instead.
A damaged panel on a wrapped room
One element · named film · matched again- What gets redoneThe one element that took the knock. Its neighbours are never opened, lifted or disturbed.
- Matching the finishBy the manufacturer's reference named on your quote and invoice — the same finish, ordered again from the same brand.
- Time and disruptionOne element, worked in situ — no demolition, no dust and no skip in the driveway.
- How the cost worksPriced as one element, itemised in writing before anything is agreed.
- Who does the workWrapt Interiors™ — the same company, the same film brand and the same paperwork as the original installation.
- How the room looks afterAs it did before. The replacement element carries the finish the quote named, not an approximation of it.
A damaged door in a replaced kitchen
Matching a range fitted years ago- What gets redoneThe damaged door has to be sourced on its own, and the discussion widens quickly to the rest of the run.
- Matching the finishBy eye, against a range that may have been discontinued, reprofiled or re-coloured in the years since it was fitted.
- Time and disruptionJoinery lead times, then a fitter, with part of the room out of use while the door is waited for.
- How the cost worksOften a conversation about replacing a whole run of doors so that everything still matches.
- Who does the workWhoever is still trading and still making that door — which is not always the cabinetmaker who fitted it.
- How the room looks afterA near-match reads as a near-match, and a run of doors under one light is where the eye finds it.
Why one panel can be redone on its own.
Wrapping is done element by element. A cupboard door is wrapped as a door, a drawer front as a drawer front, a panel as a panel — each prepared, cut to its own shape and finished on its faces, edges and returns. Nothing runs as one continuous sheet across several doors at once, so a single element can be lifted out of the sequence and redone without its neighbours being disturbed.
The film bonds to the element and takes on its shape, including curves, returns and profiled edges, so the element reads as one continuous material. Where a better wrap comes from taking a door off, it comes off and goes straight back on its existing hinges. Carcasses, panels and counters are wrapped in place. A repair takes exactly the route the original installation took.
Send us a photograph
One close-up of the damage and one of the whole run, so we can see the element and its neighbours together.
We match the reference from your paperwork
The film code on your quote and invoice tells us exactly which finish to order, from the brand that made it.
That element alone is re-wrapped
Prepared, wrapped and finished on faces, edges and returns — with the rest of the room left exactly as it is.
There is an honest limit here, and you should hear it from us rather than discover it. Film is a finish, not a structural repair. Where the damage has gone into the substrate itself — a split door, a board that has swollen, a panel that is no longer flat — a new film would only take on the new shape.
In those cases we say so, and tell you what the element needs first. It is the same counsel we give at a measure-up, where a surface should not be wrapped at all: before you spend, not after.
The paperwork that makes a match possible.
One code, carried through three documents you keep.
On the quote.The manufacturer's reference is named against each element on your written, itemised quote — the actual film code, so what you approved is recorded as a specification rather than a colour name.
On the invoice. The same code is repeated when you are billed, which means the document you file for your own records is also the document that identifies the finish.
On the roll label. It is printed on the roll your installer opens in front of you on installation day, so the film going onto your surfaces can be checked against the film on your quote while the work is happening.
Keep those two documents together with the warranty documents handed over at completion — the manufacturer's own cover against cracking, peeling and fade for up to 10 years, with our workmanship cover in writing alongside it. Filed together, they turn a repair years later into an administrative matter rather than a hunt for a colour nobody wrote down.
Behind the code sits the range. Our films come from the world's leading film brands — Cover Styl’, Bodaq, 3M DI-NOC and LX Hausys — with over 1,500 finishes catalogued between them, each published with its own specification. That is what a named reference buys you: a finish that can be found again, from the same brand, for one door.
What people ask us about repairs.
Can a scratch be fixed without re-wrapping the whole door?
It depends what the scratch has actually done, which is why we ask for a photograph first. Light marks on the surface often lift with a damp cloth and a mild household cleaner and are not damage at all. Where the film itself has been cut or lifted, the honest repair is to re-wrap that element rather than patch the middle of a face — a patch in an open face reads as a patch, in the light, for as long as the door is there. Re-wrapping the one element keeps the finish continuous.
What if the finish on my kitchen is no longer made?
The reference is what lets us find out rather than guess. We take the film code from your quote or invoice and check it with the film brand that made it, and in most cases the finish is still catalogued and can simply be ordered again. We will not pretend every finish exists forever: ranges do get retired. Where yours has been, we say so plainly and put the closest alternatives in front of you as samples, judged in your own light against the doors you already have, so you decide what an acceptable match looks like. There are over 1,500 finishes to work from.
Does a repair affect my warranty?
We put it in writing rather than leave you to find out. The film carries the manufacturer's own warranty against cracking, peeling and fade for up to 10 years, with our workmanship cover in writing alongside it, and both were handed to you as documents at completion. Before a repair starts we set out in writing what it means for your cover — on the element being redone and on the rest of the room. Accidental damage is not a manufacturing fault, and we would rather say that at the beginning than have it discovered at the end.
Can I claim a repair on my paperwork?
The documents we hand over are written so that you can. Your itemised quote, your invoice and your warranty documents name the manufacturer's film reference against each element, which is the level of detail an insurer, a landlord or a facilities manager usually asks for. If a repair is needed we issue a written, itemised quote for it naming the same reference, so the claim describes exactly what was on the door. Whether a particular claim succeeds is between you and your insurer — what we control is that the paperwork is specific.
How do I arrange a repair?
Send a photograph to hello@wraptinteriors.co.za, or call us on +27 74 906 5616. One close-up of the damage and one of the whole run is usually enough, and it helps to include the film reference from your quote if you have it to hand. We come back with an honest read: a re-wrap of that element, or something that has gone into the substrate and needs a different answer first. Where the element has to be seen properly to be priced, a call-out fee secures the visit and is credited back when you go ahead. Wrapt Interiors™ works across Johannesburg and Gauteng, and nationwide by arrangement.
Named film.
Matched again.
Send us the surfaces and the look. We bring the film brands’ sample books to you, name the exact film reference against each element, and hand over the warranty documents at completion.
Wrapt Interiors™ installs across Johannesburg and Gauteng, and nationwide by arrangement.