Architectural Film & Vinyl Wrapping
for Interiors.
- Joinery & cabinetry
- Doors & frames
- Wall panelling
- Counters & reception desks
- Lift interiors
- Shopfronts & retail fixtures
- Balustrades & columns
- Bathroom vanities
- Boardroom tables
- Feature walls
Architectural film is a new skin for the surfaces you already own. Imagine: oak doors become honed marble, a tired reception front becomes brushed brass, a dated wardrobe becomes modern, grey teak — with real wood grain, satin, high gloss and stone textures you can feel, not a painted imitation — the grain and texture are pressed into the film itself.
It can be applied to your existing kitchen doors, wardrobes, panelling, counters, reception fronts, lift cars, and a multitude of other surfaces. Nothing is ripped out and nothing is replaced.
The result is a surface that looks new, is protected against the knocks and wiping of daily life, and carries its manufacturer’s warranty, for up to 70% less than replacing the same surfaces and in a matter of days. Importantly, it is not the thin signage vinyl the cheap end of the wrapping market installs. It is a premium grade building finish, made for interiors and exteriors — and used by high-end hotels, commercial property owners, and more in places that you’ve probably already admired but never known it wasn’t real marble, steel, and expensive oak.
What architectural film actually is.
Architectural film is a thin, self-adhesive finish, made to look and feel like the real thing: oak, marble, brass, concrete. It is engineered for interior surfaces and installed by trained applicators, and it conforms to flat faces, curves, returns and profiled edges, so a wrapped element reads as one continuous material rather than a covering laid over it.
You will see the same product called architectural vinyl, architectural interior film or architectural wrapping film. They describe one family: a specified finish, cut to the element and bonded in situ. What separates a good installation from a poor one is preparation, edge work and the film itself — which is why we name the exact film reference on every specification.
The film properties that determine a successful outcome.
Architectural film against ordinary decorative vinyl — six lines that separate a building finish from a graphics material.
Architectural film
A building finish · named by reference- Made forInterior building surfaces — joinery, doors, panelling, counters, lift cars and shopfits.
- Daily contact & cleaningEngineered for surfaces that are touched, wiped and used every day, and cleaned with a mild household cleaner.
- Catalogued & specifiedEvery finish carries a manufacturer's reference and a published specification you can read before you commit.
- WarrantyThe manufacturer's own warranty against cracking, peeling and fade — up to 10 years — with workmanship cover in writing alongside it.
- Installation standardSubstrate prepared first; edges, returns and cut-outs wrapped and finished so the element reads as one material.
- How it agesHolds its colour, texture and bond for years, and a single damaged panel can be re-wrapped without touching the rest.
Ordinary decorative vinyl
A graphics material · the wrong product here- Made forSignage, displays and short-term graphics — work it performs beautifully, somewhere else.
- Daily contact & cleaningMade for surfaces that are looked at rather than handled, and not built for repeated cleaning.
- Catalogued & specifiedSold by colour and by the roll, so there is often no reference to put on a specification at all.
- WarrantyWarranted for the application it was designed for, which does not extend to a kitchen door or a reception front.
- Installation standardAt the cheap end of the market, the visible face only — edges trimmed short at exactly the point that takes the most handling.
- How it agesOn a daily-contact surface it announces itself early — lifting at handles, corners and cut-outs, and fading unevenly.
Refinishing, not replacing.
Joinery & Cabinetry
Cupboard doors, carcasses, drawer fronts and built-ins re-faced in place — the existing units keep their fit, hinges and layout.
Doors, Frames & Panelling
Wrapped doors, architraves, wall panels and column casings brought onto one palette across an entire floor plate.
Counters & Worktops
Reception desks, retail counters and worktops re-skinned in stone, timber or solid finishes without a rip-out and rebuild.
Lifts, Lobbies & Shopfits
Lift cars, lobby cladding and shopfitting elements refinished overnight, so the building keeps trading.
For the architects who design the space, and the teams who run the building.
Architects & Interior Designers
A finish library you can specify from and an installer who delivers it to the millimetre. Samples to your studio, data sheets on request.
- Sample boards & loose swatches
- Manufacturer data sheets on request
- Finish schedules by room or element
Developers & Shopfitters
Programme-friendly work that lands late in the build without holding up handover — and refits an existing asset for a fraction of a strip-out and rebuild.
- Phased, floor-by-floor installation
- Show units & sales suites
- Snag-and-repair on damaged panels
Facilities & Workplace Teams
A tired floor made presentable between tenancies, in days rather than weeks, with no demolition, no skip and no tenant relocation.
- After-hours & weekend installs
- Lift cars, doors & lobbies
- Single-panel repairs, not full replacement
The world's leading film brands, in one library.
We install Cover Styl’, Bodaq, 3M DI-NOC and LX Hausys, plus premium solids and effect films — over 1,500 finishes across marble, stone, concrete, timber, metal, textile and solid colour. Every film is browsable before you commit, and manufacturer data sheets are available on request.
From a look on a board to a finish on the building.
Sample & Specify
Tell us the elements and the look. Samples come to you, data sheets follow on request, and the exact film reference is agreed before anything is priced.
Survey & Schedule
We survey and measure on site, then issue a written, itemised specification — film reference against element, area by area, with the preparation listed rather than assumed.
Install to Programme
Applicators wrap in situ — phased, after hours, or floor by floor to suit the programme. You get the manufacturer's warranty documents at handover.
Guaranteed by the people who make the film.
Our finish films carry the manufacturers' own warranties against cracking, peeling and fade — up to 10 years — and our workmanship cover sits alongside them in writing. Where a project needs a published specification for an element or an environment, the manufacturer's data sheet is available on request; we quote it rather than paraphrase it.
What specifiers ask us first.
What is architectural film?
Architectural film is a self-adhesive interior surfacing vinyl — a thin, engineered film that bonds over an existing surface and takes on its shape, including curves, returns and edges. It is specified and installed like a finish, not like wallpaper: trained installers prepare the substrate, cut to the element and wrap it in situ. It is also sold as architectural vinyl, architectural interior film or architectural wrapping film — the same product family under different names.
What is the difference between architectural film and ordinary vinyl wrap?
Class of material, and standard of installation. Architectural film is manufactured as a building finish: engineered for daily contact and cleaning, catalogued by reference, and carrying its manufacturer's published specification and warranty. Ordinary decorative or signage vinyl is a different product built for a different job, and much of the low-priced wrapping market runs on it. The distinction shows up later, not sooner — at the edges, on the references, and when a warranty is actually called on. We install architectural film only, named on the specification so it can be verified.
How long does architectural film last?
The films we install are warrantied by their manufacturers against cracking, peeling and fade for up to 10 years. Actual life depends on the element, the traffic it takes and where it sits in the building — we tell you the honest expectation for your surfaces before you commit, and the manufacturer's data sheet is available on request.
Which brands of architectural film do you install?
Cover Styl’, Bodaq, 3M DI-NOC and LX Hausys, alongside premium solids and effect films — over 1,500 finishes in total. The film named on your specification is the film that goes on your surface, and the roll labels are there to check on install day.
Can architectural film be used in commercial and high-traffic spaces?
Yes — it is at its strongest exactly there: doors, lift cars, reception fronts, panelling and shopfitting elements that take hundreds of touches a day. Each film has its own published specification for the application it suits, and we will specify against the element rather than assume. Where a spec matters, the manufacturer's data sheet is available on request.
How does architectural film compare to replacing the joinery?
Typically up to 70% less than replacing the same surfaces, installed in situ in days rather than weeks. Nothing is demolished, nothing goes to the rubbish dump, and the space stays usable while we work. What you cannot change is the layout — film changes the finish, not the plan.
How do architects and designers specify it?
Tell us the elements and the look. We send samples, supply the manufacturer's data sheets on request, survey the site and measure, then issue a written, itemised specification listing the exact film reference against each element. Installation is programmed around your works — phased, after hours or in a single hit.
Put a finish
on the drawing.
Send us the elements and the look you are after. We get samples to you, supply data sheets on request, and arrange a survey — then issue a written, itemised specification.
Wrapt Interiors™ installs across Johannesburg and Gauteng, and nationwide by arrangement.